
Business continuity consulting: A plan tested before you need it
No one has ever tested what happens if the main system goes down on a Monday at 9 a.m. We identify critical processes, analyze the impact of a disruption, and define response and recovery plans so operations don't stop.
From impact analysis to the drill.

01Business impact analysis (BIA)
Critical processes, dependencies, impact per hour of disruption and recovery priority.

02Continuity strategies
How each critical process keeps running while the system is recovered: manual alternatives, alternate sites or services, backups.

03Business continuity plan (BCP)
Who decides, who communicates, what happens in the first hours and how normal operations resume.

04Disaster recovery plan (DRP)
The technical part: which systems are restored, in what order, with which backups and who executes it.
What does business continuity consulting do?
It defines how the company keeps operating when something critical fails. It starts from a business impact analysis (BIA) that identifies which processes are indispensable and how much damage each hour without them causes; from there come the recovery targets (RTO and RPO), the business continuity plan (BCP) and the disaster recovery plan (DRP). The plan belongs to leadership, not only to the IT department.
What is a business continuity plan for?
Knowing what cannot stop
It identifies critical processes, their dependencies and the impact of an interruption.
Responding in the first hours
It defines who decides, who communicates and what is done when the failure happens.
Recovering systems in order
It sets which systems are restored, in what order and from which backups.
Testing it before it happens
An exercise with a real scenario, and a calendar to keep the plan current.
In short
BIA
Which processes are critical, which systems and people they depend on, and how long each can be down.
Measurable targets
RTO: maximum time to recover a service. RPO: how much data can be lost. They are set with leadership, not with the vendor.
Public references
ISO 22301 is the international standard for business continuity management systems; NIST SP 800-34 describes the BIA and the plan types (BCP, DRP). They serve as references; certification is not mandatory.
See the full approach
A business continuity plan defines how the organization keeps operating when something critical fails: a system, a supplier, a site or a key person. It is not an IT document: it is a leadership decision about which processes cannot stop and how much the company is willing to invest so they don't.
That is why we start with the business impact analysis (BIA). According to NIST SP 800-34, the BIA correlates each system with the business processes it supports and, based on that, characterizes the consequences of a disruption. From there come two measurable targets: the RTO, the maximum time a resource can remain unavailable before there is an unacceptable impact, and the RPO, the point in time to which data can be recovered after an outage.
With the targets defined, the continuity strategies and the disaster recovery plan (DRP) are designed: which systems are restored, in what order, with which backups and who decides. The same guide distinguishes the business continuity plan (BCP), focused on sustaining business processes during and after a disruption, from the DRP, focused on restoring information systems.
In our view, the most frequent mistake is having a plan that has never been tested. A drill with a real scenario — the ERP goes down on a Monday at 9 a.m. — shows in hours what a document doesn't show in months: who didn't know they had to decide, which backup didn't restore, and which vendor didn't answer.
ISO 22301:2019 is the international reference for business continuity management systems: a framework to plan, implement, operate, review and improve a documented management system that protects the organization from disruptive incidents and ensures recovery. Not every company needs to certify, but every company needs a plan that holds up to that logic. If the plan requires new backup, high-availability or alternate-site solutions, we select them with our infrastructure consulting, with no vendor commissions, and Project Management governs the implementation.
Read also: RTO and RPO: what they are and how to set them in your continuity plan
From “we have never tested it” to a plan that works
For the company that has never tested what happens if the main system goes down on a Monday at 9 a.m.
- 01
We identify what cannot stop
Critical processes, dependencies, impact per hour of interruption and recovery priority.
- 02
We define how it keeps running while it recovers
Manual alternatives, alternate sites or services and backups for each critical process.
- 03
We write down who decides and who communicates
What is done in the first hours and how the business returns to normal.
- 04
We plan the technical recovery
Which systems are restored, in what order, from which backups and who carries it out.
- 05
We test it with a real scenario
An exercise before the plan is considered finished, and the calendar to repeat it.

Direct execution, not 200-page reports
We don't hand over a 200-page report and disappear: we stay until the changes are working in the real operation — not in the slides.
- Reduction in diagnosis time compared to traditional consulting firms, based on Cyrrus internal measurements.
- 60%
- We start executing from week 1, not at the end of the diagnosis.
- W1
Benefits of a continuity plan
Knowing what to do before the main system fails.
Critical processes identified
You know which processes cannot stop and what each hour of interruption costs the business.
A defined response
Who decides, who communicates and what happens in the first hours.
Orderly technical recovery
Which systems are restored, in what order and from which backups.
A plan that was tested
An exercise with a real scenario before the plan is considered finished.
Before writing the plan, read this
Frequently asked questions about business continuity consulting
When the operation depends on one or two systems and no one has tested what happens if they go down; when a customer, a bank or a regulator asks for the continuity plan; when the company migrated critical infrastructure to the cloud and the old plan no longer applies; or when a plan exists on paper but has never been rehearsed.
According to NIST SP 800-34, the business continuity plan focuses on sustaining business processes during and after a disruption; the DRP is an information-system-focused plan to restore systems, usually at an alternate site, after a major disruption; and a system's contingency plan describes how to assess and recover that specific system. The BCP belongs to leadership; the DRP and contingency plans to IT; all three must be coordinated.
The business impact analysis correlates each system with the processes it supports and characterizes the consequences of a disruption. It leaves three results: which processes are critical and how long they tolerate being down, which resources are needed to recover them, and in what order they are recovered.
The RTO (Recovery Time Objective) is the maximum time a resource can remain unavailable before causing an unacceptable impact on the processes it supports. The RPO (Recovery Point Objective) is the point in time, prior to the outage, to which data can be recovered with the latest backup; it measures how much data loss the process tolerates. Leadership sets them with the business, not the vendor.
It is not mandatory. ISO 22301:2019 is the international standard for business continuity management systems and serves as a reference to structure the plan; certifying makes sense when a customer or the sector requires it. Our service defines and tests the plan; if the company decides to certify, the plan is built with that logic.
If the plan requires backup, high availability, an alternate site or cloud, we select the solutions with our infrastructure consulting, with no vendor commissions, and Project Management (PMO) governs the implementation.
Have another question?